The Large Cursor is compatible with Aluminium Fences. We have added a Cursor Plate which makes a link between the Cursor and the Sliding Bar when using the MR4 Mortise Rail without fouling the machine face or work in the trough of the MR4. Comes complete with 2 x M4 12 Countersunk Screws, M4 Nuts and Spacers.

The Cursor now tracks out to the left of the channel following marks on the measuring rod. This in effect lengthens the reach of the machine to 1200mm without the cost of increasing the length of the Channel. The MR4 will work on any length of workpiece if you relocate it in the trough.